OCT J59
OCT J59.3 only (room mode: partition wall closed)
Start System
- Switch on the AV system on the touch panel.
- The cable connections only work
when the AV system is switched on. - As soon as the system is switched on, the “ON/OFF” button lights up green
- Confirm the start of the display with “yes”.
Select Input
The following sources are available:
- In 1 | J 59.3: HDMI cable on the side of the sideboard
- In 2 | J 59.3: HDMI via floor box J59.3 (find connection set in the sideboard)
- Wireless Presenter: via the Solstice app
Note: A green bar on the right-hand edge of the button indicates an active source at the corresponding input.
Connect HDMI Cable to Laptop
Recommended for normal use: HDMI cable "In 1" (see picture)
OCT J59 whole area (room mode: partition walls open)
Start System
- Switch on the AV system on the touch panel.
- As soon as the system is switched on, the “ON/OFF” button lights up green
- Confirm the start of the display with “yes”.
Select Input
The following sources are available:
- In 1 | J 59.3: HDMI cable on the side of the sideboard
- In 2 | J 59.3: HDMI via floor box J59.3 (connection set in the sideboard)
- In 3 | J 59.2: HDMI via floor box J59.2 (connection set in the sideboard)
- In 4 | J 59.1: HDMI via floor box J59.1 (connection set in the sideboard)
- Wireless Presenter: via the Solstice app (personal laptop)
Note: A green bar on the right-hand edge of the button indicates an active source at the corresponding input.
Microphone & Audio from Computer
The “Mute” button can be used to mute the microphone
computer audio from the connected computer
can be individually muted/activated.
Connect HDMI Cable to Laptop
Recommended for normal use: HDMI cable "In 1" (see picture)
Notes:
- The microphones are only active in “Partitions walls open” room mode
- The headset and hand microphone are located in the cabinet under the touch panel. Please put them back in the charging cradle after use.
Using the connections in the floor boxes
- Connection Set fot the Floor Box
Use the connection set for the floor box from the sideboard (below the display):
- Extron DTP-Box
- HDMI cable
- Network cable
Note: After use, please return the material to the sideboard.
Connecting to the Floor Box
- The Extron DTP boxes, as well as the floor boxes, are labeled.
- When connecting, make sure to use the corresponding DTP boxes (IN 2 | IN 3 | IN 4)
Connect HDMI Cable to Laptop
Connect the HDMI cable from the Extron DTP box to the laptop.
Select Source
On the touch panel, under DEVICE, select the correct connection
(in this example: In 2 | J59.3)