How to Print from manual feed

Printing from manual feed from office applications

To print on a different paper type, you should set this in the print properties.

You should click on "Print properties".

Under Paper Type, select the desired paper type.

Select "Bypass" (Manual Feeder) under Tray Tray.

Press "OK" and send the print job.

Go to the Nashuatec multifunction device and load the desired paper type onto the bypass.

The multifunction device will still display the specific ETH message:

„The bypass has been selected. Make sure that the paper inserted in the bypass corresponds to the format, etc..."

Press "Print" and the document will be printed.

To print on a different paper type, you should set this in the print properties.

Under Paper Handling, select "Bypass".

Change to the folder "Printer Options" (Printer Features) and to the subfolder "Generel 3" (General 3) to select the desired paper type.

Now press "Print" to send the print job.

Go to the Nashuatec multifunction device and load the desired paper type onto the bypass.

The multifunction device will still display the specific ETH message:

„The bypass has been selected. Make sure that the paper inserted in the bypass corresponds to the format, etc..."

Press "Print" and the document will be printed.

To print on a different paper type, you should set this in the print properties.

Under Paper source, select Bypass Tray.

Under Paper type, specify the desired media.

Now press "Print" to send the print job.

Go to the Nashuatec multifunction device and load the desired paper type onto the bypass.

The multifunction device will still display the specific ETH message:

„The bypass has been selected. Make sure that the paper inserted in the bypass corresponds to the format, etc..."

Press "Print" and the document will be printed.